Zorlu ADB-6002, Руководство пользователя, Страница: 10 / 17

Flections and bends at the alumi nium pipe reduce the
air absorbtion power, because of that use less flections
and bends as possible.
Picture 4
Correct
False
Replacing the Lamps
Cut off the connection of the cooker hood with electricity. Take off the aluminum cassette filter.
Take off the failed lamp and replace it with a new one that is of the same rating. (Please wait for the
lamps to cool as they might hurt your hand.)
Note: You may purchase the lamps from authorized sellers and after sales services
Replacing bulb
In order to change the bulb, turn it anti-clockwise and take it
off.
Replace it with a new one in the same value by turning it
in clockwise. Figure 6
Functions of the Product
Your hood is compatible for use with our without chimney.
Usage with chimney
The product should be connected to a chimney that will direct the air out during usage with
chimney. In order to achieve best performance, pay attention that the duct system follows the
shortest way for connection to the chimney. Your product is produced as it will be appropriate for
usage with chimney.
Attention!!!
Outlet of the product should not be connected to air canals that have other smoke as well.
Active Carbon Filter
To provide air recirculation where product's chimney air outlet cannot be connected to exterior, it
is necessary to use active carbon filter with your product. You may purchase this accessory from
authorized sellers and after sales services.
Picture 4
Figure 6
10