Zoppas PC423NFXX, Руководство пользователя

Страница: 4 / 16

Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its refrig-
erant circuit or insulation materials. The appliance shall
not be discarded together with the urban refuse and
rubbish. The insulation foam contains flammable
gases: the appliance shall be disposed according to the
applicable regulations to obtain from your local author-
ities. Avoid damaging the cooling unit, especially at the
rear near the heat exchanger. The materials used on
this appliance marked by the symbol are recyclable.
Control panel
1 2 3
1 Fan function switch
Fan light
2 Temperature regulator
Fast Freeze button
3 Fast Freeze indicator
Switching on
Remove, if present, the remove label stuck on the in-
side of the freezer compartment.
Insert the plug into the wall socket.
Switching off
To switch off the appliance remove the mains plug.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• Press the temperature regulator more times until the
LED corresponding to the required temperature
lights up. Selection is progressive, varying from
+2°C to +8°C. The temperature indicated by the
LED is selected each time the button is pressed.
A medium setting is generally the most suitable.
However, the exact setting should be chosen keeping
in mind that the temperature inside the appliance de-
pends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Important! If the ambient temperature is lower than
16°C press the temperature regulator until the LED
corresponding to the lowest temperature lights up.
Fast Freeze function
You can activate the Fast Freeze function by pressing
the Fast Freeze button more times until the LED cor-
responding to the symbol Fast Freeze indicator lights
up.
To deactivate the Fast Freeze function by pressing the
Fast Freeze button more times until the required tem-
perature is selected.
First use
Cleaning the interior
Before using the appliance for the first time, wash the
interior and all internal accessories with lukewarm wa-
ter and some neutral soap so as to remove the typical
smell of a brand-new product, then dry thoroughly.
Important! Do not use detergents or abrasive pow-
ders, as these will damage the finish.
4