8
PAIRING HEADSET
The following steps describe pairing process for a typical Bluetooth-enabled Mobile Phone.
1.
Make sure the headset is off (no flashing lights)
2.
Press and hold MFB button for about 10 seconds (until light flashes red and blue)
NOTE
:
After first 4 to 5 seconds the light will only flash blue DO NOT release the button
3.
Once light starts flashing red and blue release the button
NOTE:
Light will flash red & blue for 1 minute, during this time the headset is discoverable by your
cellular phone
4.
While headset light flashes red & blue, complete pairing process on your cellular phone (see your
cellular phone’s user manual for pairing instructions)
NOTE:
In case the light starts flashing just blue and you were not able to complete pairing process,
please
turn off the headset
and start again from step 2)
5.
When prompted for a passkey enter 1234
NOTE:
When pairing is completed, the Headset LED will flash blue, followed by a long beep and
the headset light will start flashing blue every 4 seconds. Headset is now connected to the phone
and is ready for use.
