On/
Off S
ta
tus R
ecover
y A er P
ow
er F
ailure
Parameter 1: Choose the recovery state for your Double Plug’s outlets if
power outage occurs.
Values: 0 – Double Plug remembers the status for each outlet prior to
power outage and turns back to it (default); 1 – Double Plug automatically
turns ON for each outlet once power is restored (it does not remember the
status prior to power outage); 2 – Double Plug automatically turns OFF
each outlet once power is restored (it does not remember the status prior
to power outage); Size: 1 byte dec.
P
ow
er W
attag
e Report Value Threshold
Parameter 2: Choose how you want your Double Plug to report power
consumption to your hub. The number entered as value corresponds to
the number of Watts the appliance needs to go over for the change to be
reported. So if 5 Watts are entered by default, the Double Plug will report
any change in power usage over 5 Watts for each outlet (whether it’s at
least 5 Watts mor
e or 5 W
att
s less c
ompared to previous report).
Values: 0 – 65535. 0 – disabled (Double Plug will not report power
consumption based on this setting). Default set to 5. Size: 4 byte dec.
P
ow
er W
attag
e Report F
requency
Parameter 3: The number entered as value corresponds to the number of
seconds. So if 30 is entered by default, the Double Plug will report power
consumption (Wattage) every 30 seconds.
Values: 30 – 2678400. Default set to 30. Size: 4 byte dec.
Energ
y (kWh) Report F
requency
Paramet
en you want your Double Plug to report
power consumption (W) to your controller (hub). The number entered as
value corresponds to the number of seconds. So if 300 is entered by
default, the Double Plug will report energy usage every 300 seconds (5
minutes).
Values: 5 – 2678400. Default set to 300. Size: 4 byte dec.
V
oltag
e (V) Report F
requency
Paramet
en you want your Double Plug to report
voltage to your controller (hub). The number entered as value
corresponds to the number of seconds. So if 300 is entered by default, the
Double Plug will report voltage every 300 seconds (5 minutes).
Values: 5 – 2678400. Default set to 300. Size: 4 byte dec.
Electric
al C
urr
ent (A) Report F
requency
Paramet
en you want your Double Plug to report
electrical current (A) to your controller (hub). The number entered as value
corresponds to the number of seconds. So if 300 is entered by default, the
Double Plug will report current every 300 seconds (5 minutes).
Values: 5 – 2678400. Default set to 300. Size: 4 byte dec.
Overlo
ad Pr
otection
Parameter 7: Set the amp level for overload protection to kick in. The
number entered as the value corresponds to the total number of amps the
Double Plug needs to detect across both outlets t
o turn off aut
omatically
and send a no
tific
ation to the hub and associated devices.
Values: 1 – 10 (A). Default set to 10 A.
Size: 1 byte dec.
Auto Turn-Off Timer
Parameter 8: Use this parameter to enable or disable the auto
turn-off
timer for
outlet. If this feature is enabled, the device
connected to CH1 outlet will automatic
er a fix
ed period of
time from being turned on (set in parameter 9).
Values: 0 – timer disabled (def
ault); 1 – timer enabled; Siz
e: 1 byte dec.
Parameter 9: Use this parameter to se
er which you want the
device connected to
) outlet to automatic
ally turn off onc
e it
has been turned on. The number entered as value corresponds to the
number of minutes.
Values: 1 – 65535 (minutes). Default set to 60 (minutes). Size: 4 byte dec.
Parameter 12: Enable or disable the auto
turn-off
timer for
the
right
(CH2)
outlet.
Values: 0 – timer disabled (def
ault); 1 – timer enabled; Siz
e: 1 byte dec.
Parameter 13: Se
er which you want the device connected to
the right (CH2)
outlet to automatic
ally turn off onc
e it’s been turned on.
Values: 1 – 65535 (minutes). Default set to 60 (minutes). Size: 4 byte dec.
ADVANCED SETTINGS
Please refer to your controller's user guide for advanced programming
instructions as they are a lit
tle diff
erent for ever
are.
No
t sure where to s
tart
? Go to www
.support.getzooz.c
om for de
t
ailed
instruc
tions how to change the se
t
tings on SmartThings, V
er
a, and
more.
Or just email us: [email protected]
ASSOCIATION
The Double Plug supports Group 1 for lifeline communication of on/
off
status to the Z-Wave gateway controller (hub).
It supports Group 2 for on/
off and overlo
ad no
tific
ations (BASIC_SET) to
other devices in the group.
CUSTOMIZE YOUR DOUBLE PLUG
Auto Turn-On Timer
Parameter 10: Use this parameter to enable or disable the auto
turn-on
timer for
outlet. If this feature is enabled, the device
connected t
t will automatic
er a fix
ed period of
time fr
om being turned off (se
t in parameter 11).
Values: 0 – timer disabled (def
ault); 1 – timer enabled; Siz
e: 1 byte dec.
Parameter 11: Use this parameter to se
er which you want the
device connected to
) outlet to automatically turn on once it
has been turned off
. The number entered as value corresponds to the
number of minutes.
Values: 1 – 65535 (minutes). Default set to 60 (minutes). Size: 4 byte dec.
Parameter 14: Enable or disable the auto
turn-on
timer for
the right
(CH2
) outlet.
Values: 0 – timer disabled (def
ault); 1 – timer enabled; Siz
e: 1 byte dec.
Parameter 15: Se
er which you want the device connected to
the right
outlet to automatically turn on onc
e it has been turned off
.
Values: 1 – 65535 (minutes). Default set to 60 (minutes). Size: 4 byte dec.
Manual Contr
ol
Parameter 16: Choose if you want to use the Z-Wave button on the Double
Plug to turn the outlet
s on or off manually or if you w
ant to disable this
function. If this parameter is set to 0 (disabled), you will only be able to
turn any of the outlet
s on or off r
emotely using your Z-Wave gateway
controller.
Values: 0 – manual control disabled for both outlet
s; 1 – manual c
ontrol
enabled for both outlets (default). Size: 1 byte dec.
LED Indic
at
or Mode
Parameter 17: Choose if you want the LED indicat
ors nex
t to each outlet to
c
ome on when power is on or off
, or if you want to disable them.
Values: 0 – LED indicator will display power consumption whenever the
device is plugged in (LED stays on at all times, e
ven if the plug is off
); 1 –
LED indicator will display power consumption whenever the device is ON
in and will turn off when the plug is OFF (def
ault); 2 – LED indicator will
display the level of power consumption for 5 seconds only whenever the
devic
e is turned on or off (LED indic
ator will st
ay off f
or most of the time); 3
– LED indicator is OFF a
t all times ex
cept f
or inclusion, ex
clusion, and
Z-Wave range test.
Size: 1 byte dec.
You can also switch between the LED indicator modes by
clicking the Z
-
W
av
e but
t
on 6 times quickly
.
You can easily check if the Double Plug is within your Z-Wave hub’s range:
Press and hold
the Z-Wave
but
ton
for
6 to 8 seconds
until the LED
indicator turns
viole
t.
The LED indicator will then report signal strength.
Solid green =
direct communication with the primary controller is stable
Flashing green =
direct communication with the primary controller is
established but signal is weak
Solid or
ang
e =
stable communication with hub via repeaters
Flashing or
ang
e =
communication with the primary controller is
established via repeaters but signal is weak
Solid red =
communication with the primary controller has failed
Press and r
elease
the Z-Wave
but
t
on
to
exit
testing mode.
NOTE: This function may only be activated once the Double Plug has been
included to a Z-Wave network.
This device requires the following
c
ommand classes
to be supported and
recognized by your Z-Wave controller:
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_FIRMWARE_UPDATE_MD
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_METER
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION
COMMAND_CLASS_MULTI_CHANNEL
COMMAND_CLASS_NOTIFICATION
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_SECURITY_2
COMMAND_CLASS_SUPERVISION
COMMAND_CLASS_SWITCH_BINARY
COMMAND_CLASS_TRANSPORT_SERVICE
COMMAND_CLASS_VERSION
COMMAND_CLASS_ZWAVEPLUS_INFO
This product can be included and operated in any Z-Wave network with other
Z-Wave c
ertified de
vices from other manufacturers and/or other applications.
All non-battery operated nodes within the network will act as repeaters
regardless of vendor to increase reliability of the network.
This product features the latest Security 2 (S2) framework to remove smart
home network hacking risks.
This is an ETL c
ertified de
vice. ETL, just like UL, is a Nationally Recognized
Testing Laboratory. The ETL mark is proof of product compliance to North
American safety standards.
S2
RANGE TEST TOOL
QUESTIONS?
