3
●
Connect the accessory AC adapter to the DC INPUT jack. The power to
the 3000 is ON when the AC adapter is plugged into a power outlet.
Adjust the volume of the musical instrument and the amplifier while
playing the instrument.
300mA
DC9V
OUTPUT
(PHONES)
MIC IN
INPUT
REMOTE IN
SERIAL NO.
PHONES OUT
MIC IN
INPUT
REMOTE IN
OUTPUT
DC INPUT
Guitar amplifier
Headphones
AC adapter
Guitar
HM01
RP01
When using the optional
remote pedal RP01, use the
remote cable supplied with
the RP01 to connect the
REMOTE OUT jack of the
RP01 to the REMOTE IN
jack of the 3000. Power for
the remote pedal will be
supplied by the 3000.
Other remote cables
available as options (RC05,
RC10) cannot be used.
When using a
microphone for the
TALKING BOX
effect, connect it to
the MIC IN jack. The
optional headset
microphone HM01 or
another dynamic
microphone can be
used.
A pair of stereo headphones can be
connected to the OUTPUT
(PHONES) jack. If the volume level
from the headphones is low, use
phones with low impedance.
When using the 3000 with one guitar
amplifier, make the connection with a
mono cable. When using two guitar
amplifiers, a stereo Y cable is required. The
use of two amplifiers will result in
impressive wide sound for stereo effects.
PEDAL SW
MODE SELECT
MONITOR
STATUS
MODE DELECT
PEDAL-WAH
ON/OFF(PEDAL SW)
DELAY MODE
(PEDAL SW TRIGGER)
RTM MODE
VOLUME
ASSIGN
PEDAL-PITCH
ON/OFF(PEDAL SW)
Getting Connected
Before Playing
STEP
1
Cut the power to the amplifier, turn the volume down to its minimum level, and
connect the 3000 correctly to the musical instrument and amplifier
STEP
2
Power up the 3000.
STEP
3
Switch ON the power to the amplifier.
ADVANCED GUITAR EFFECTS PROCESSOR
Names
of
Parts
After completing connection, the volume has to be adjusted according to the following procedure.
