25
Cannot select or use the
device
t
Confirm that the
is connected to the
computer correctly.
t
Quit all the software that is using the
,
and disconnect and reconnect the USB cable
connected to the
.
t
Reinstall the driver.
t
Connect the
directly to a USB port on the
computer. Do not connect it to a USB hub.
t4FU01&3"5*0/.0%&UP"6%*0*/5&3'"$&
(
→
1
Playback sound cannot be heard or is quiet
t
Check the speaker connections and volume
settings on the speakers.
t"EKVTU UIF 065165 BOE 1)0/&4 WPMVNF
controls.
t
Con
fi
rm that the Sound setting of the computer
UIBUZPVBSFVTJOHJTTFUUP;00.6
t"EKVTUUIF%*3&$5.0/*503LOPC
t
If no sound can be heard or the volume is low
GSPNUIF1)0/&4-*/&065PVUQVUTBEKVTU
UIF#"-"/$&LOPC
Recorded audio is too loud, too quiet or silent
t
Adjust the input gain of the
.
t
When using a condenser mic, turn phantom
power on.
t
C o n f i r m t h a t t h e S o u n d s e tt i n g o f t h e
computer that you are using is set to "ZOOM
6
The sound of the device connected to the
input jack is distorted
t
Con
fi
rm that the level indicators are not lighting
red. If they are, lower the input levels.
Sound skips during playback or recording
t
If you can adjust the audio buffer size of the
software that you are using, increase the buffer
size.
t5VSO UIF BVUPNBUJD TMFFQ GVODUJPO BOE PUIFS
computer power saving settings OFF.
t
Connect the
directly to a USB port on the
computer. Do not connect it to a USB hub.
Cannot play or record
t
Con
fi
rm that the Sound setting of the computer
UIBUZPVBSFVTJOHJTTFUUP;00.6
t
Confirm that
is set for input and output
in the software you are using.
t
C o nf ir m t h at
i s c o nn e c te d to t h e
computer correctly.
t
Quit all software that is using the
, then
disconnect and reconnect the
T 64#
cable.
Cannot use with an iPad
t4FU01&3"5*0/.0%&UP"6%*0*/5&3'"$&
(
→
1
t
Confirm that the batteries are loaded or the
external power supply is connected correctly.
(
→
P. 7)
t4FUUIF108&3TXJUDIUP#"55&3:%$*/UP
turn the power on.
Sound skips during digital input or output
t
Confirm that the device used for audio clock
synchronization is connected correctly.
t
If the
is the master, confirm that audio
clock is synchronized on the connected device.
t
If the
is a slave, con
fi
rm that the correct
clock source and sampling rate are selected
BOEUIBUUIF4:/$JOEJDBUPSJTMJU
Cannot use in standalone AD/DA mode
t4FUUIF01&3"5*0/.0%&UP45"/%"-0/&
and select the correct clock source before
turning the power on.
5SPVCMFTIPPUJOH