Zoom Single, Сборка и инструкция пользователя

Страница: 8 / 12

Double check that the wood screws are not
too long for your desktop and won’t puncture
the surface when screwed all the way in.
We recommend that you pre-drill any holes
needed for fasteners. Never use countersunk
screws.
Double check that the desk base is properly
positioned on the underside of the desktop.
Attach the desk base to the underside of the
desktop using eleven (11) M5x20 Wood Screws
(part 13).
Attach the Handset (part 8) so the front of the handset is flush with the front desktop
edge (or recessed up to 1/8”). The handset may be placed anywhere along the
front edge of the desktop, but we recommend placing it towards an end so it
prevents interference when seated. Use two (2) M5x16 Wood Screws (part 14) to
attach the handset to the desktop.
Do not overtighten screws in this step. Overtightening could cause damage to the
components.
Slide the Control Box (part 7) onto the Frame
End-CB (part 3).
Connect the cable exiting the Leg (Part 1)
that is attached to the Frame End-CB (part 3)
directly into the Control Box (part 7).
Connect the Cable (part 10) to the other Leg
(part 1) and to the Control Box (part 7).
Connect the Handset (part 8) cable to the
Control Box (part 7).
Connect the Power Cord (part 9) to the
Control Box (part 7).
Use the adhesive-backed Cable Clips (part 15) to secure the cables so they do not
sag.
Assembly
8
9
7 8
8
13
14
3
8
7
10