Zoom RFX-2000 Скачать руководство пользователя страница 3

INSTRUCTION SHEET 2

PLAYING  TIPS

There  are  no  wow  and flu tter effects  on  the Zoom  RFX-2000.  To  compensate fo r  this, you can

 

try  what  comes  naturally  to  many  players,  by  holding  the  guitar’s  tremolo  arm  as  much  as

 

possible  whilst playing  lead  lines,  even  when  the  obvious  tremolo  arm  effect  is  not  required.

 

There  is  no  need  to  deliberately  wobble  the  arm,  and  lightly  holding  it  whilst  playing  can

 

produce  a pleasing  effect.  O f course, you should use  the  arm  in  the  usual  way  when you  wish

 

to.  When  damped notes are being played it is not usually possible to hold the arm,  and wow and

 

flutter  effects,  even  when present,  are  not  usually  exposed under these  conditions  in  any  case.

 

Deliberately  pressing  down  slightly  on  the  bridge  can  also  produce  interesting  effects  whilst

 

playing damped notes.
A  M IDI fo o t  controller  can  be  used to  remotely  select  the programs.  Please  note  some  MIDI

 

pedals may contain features you do not want or need and may cause unpredictable effects to the

 

sound  o f  some  or  all programs.  The  M IDI section  o f  the  RFX-2000  has  to  be programmed i f

 

you  require programs  to  be  assigned to specific pedal numbers.  Full details start on page  10 o f

 

the Zoom RFX-2000 operation manual.

ALTERING PARAMETERS OF A N  INDIVIDUAL PATCH

The available parameters depend on the program selected.  Only information specific to Echoes

 

From  The  Past programs  will  be  shown  here.  Before  considering permanently  changing  and

 

storing  new  parameters you   should  make  a  note  o f  the  old  settings  and  also  note your  new

 

settings in case you  need to renew them i f  you r programs are lost fo r  any reason.  Details o f  how

 

to  identify  existing  settings  are  on  page  8  o f  the  Zoom  RFX-2000  operation  manual.  Echoes

 

From  The Past cannot reprogram you r own preferred settings.

ROTARY CONTROL  FUNCTIONS

The M IX  control adjusts the dry/wet ratio (and therefore effect level) fo r  all programs.

FOR ECHO PROGRAMS 01  to 25, 35,  36 and 37

 

R E V  CHARACTER adjusts the tone o f  the echo.
R E V  TIME adjusts feedback time in hundreds o f  milliseconds from  0 to  14 (0 to  1400 m/s)
REV EQ L O W  adjusts the feedback time in milliseconds from  0 to  99.

R E V  EQ HIGH adjusts the amount offeedback.
FOR ECHO PROGRAMS 26 to 34 -  The  TAP button can be  used to set the required delay time

 

fo r  these programs.  For fin er control the delay time can be set as detailed below.

R E V  CHARACTER  adjusts  the  tone  o f  the feedback.  Higher settings give  warmer subsequent

 

repeats.

R E V  TIME adjusts delay time in  hundreds o f  milliseconds from  0 to 29 (0 to 2900 m/s)

REV EQ  LO W  adjusts  the  delay  time  in  milliseconds from   0 to  99  (0 to  72  at the  29  hundreds

 

setting).
R E V  EQ HIGH adjusts the amount offeedback.

FOR PROGRAM 38  See the Zoom RFX-2000 operation  manual fo r  adjusting SFX ROTARY.

 

FOR PROGRAMS 39,  40, AND 41 See user manual fo r  adjusting EFFECTS  TRM-PAN.

FOR PROGRAM 42 See the operation manual f o r  adjusting DELA Y DLY+REV

 

FOR PROGRAM 43 See the operation manual fo r  adjusting EFFECTS CHO+REV.

FOR PROGRAMS 44 AND 45 See the operation manual fo r  adjusting REVERB HALL.

I f  you   wish  to permanently  change  a program you   may prefer to  keep  the  original and instead

 

copy it to a chosen location,  alter the copied program and store its new setting(s) instead.  I f  this

 

is  done  it  may  be  difficult  or  impossible  to  retrieve  the  overwritten program  so  be  sure  not to

 

overwrite any programs you  wish  to keep.

TO COPY A  PROGRAM OR STORE A N  EDITED PROGRAM

 

This is described on page 8 o f  the Zoom RFX-2000 operation  manual.

Отзывы: