Zoom RFX-1000, Руководство по эксплуатации

Страница: 11 / 16

11
ZOOM RFX-1000
Reverb Time
8
Chorus
9
Solo Winds
10
Church Organ
11
Synth/2
Wide reverb for chorus groups.
Subdued reverb great for wind instrument solos.
Reverb for adding a spacious feeling to organ
music.
Great reverb sound for synthesizer.
Sets the reverb
duration.
9.
POWER
CHARACTER REVERB TIME
1
Kick/1
Reverb Time
2
Kick/2
3
Snare/1
4
Snare/2
5
Toms/1
6
Toms/2
7
Hand Perc
8
DistGtr/1
9
DistGtr/2
10
Vocal/1
11
Vocal/2
These effects add a feeling of power and energy to sound sources.
Stresses the body impact of bass drums.
Increases the perceived size of the bass drum
image.
Stresses the body sound of snare drums.
Adds a bright reverb sound to snare drums.
Suitable for low toms and floor-standing toms.
Emphasizes the midrange sound of tom-toms.
Suitable for hand percussion.
Suitable for distortion guitar sound with strong box
character.
Suitable for distortion guitar sound with bright
character.
Increases the power impact of vocals.
Suitable for ballad type vocals.
Sets the reverb
duration.
Recommended
setting
S/R
10.
GATE
CHARACTER REVERB TIME
Threshold Reverb Time
Special effect where the reverb is briskly cut by a gate.
Adjusts the threshold level where the
gate becomes active.
Sets the reverb duration.
S/R
11.
REVERSE
CHARACTER
Threshold Reverb Time
This achieves a similar effect as a tape run in reverse.
Adjusts the sensitivity of the effect, that
is the level from which the reverb is
applied.
REVERB TIME
Sets the reverb duration.
S/R
• EFFECTS Bank
This bank contains seven sophisticated single effects (1 - 7) as well as four combined effects (8 - 11) which use two
effects simultaneously. The combined effects marked with a "+" are made up of two effects connected in series. The
combined effects marked with a "/" use two effects in parallel in the left and right channel.
1.
COMP LIM
(Compressor
•
Limiter)
VARIATION REVERB TIME/ADJUST
Comp Lim
Release Threshold
This effect serves for keeping signal levels within a certain range.
The compressor raises the level of signals below a certain threshold and
reduces the level of strong signals. The limiter only reduces the level of
strong signals.
Switches between compressor and limiter
and adjusts the release time. Sets the level where the
compressor/limiter becomes
active.
1 - 6: Compressor
Higher values mean longer
release time.
7 - 11: Limiter
Higher values mean longer
release time.
RFX-1000
Ef
fects