■
Effect Module 2: Equalizer (EQ)
This effect module comprises four effect types to control the
tonal character of the sound.
This is an equalizer with independent boost/cut for the high,
mid, and low frequency range. The mid-range control is a
parametric type allowing the user to freely select the center
frequency.
Explanation
(1)HI (high range):
Adjusts the high frequency range. A
value of 0 (zero) signifies flat response. The higher the
value, the stronger is the high frequency boost.
(2)MID (midrange):
Adjusts the mid frequency range. A
value of 0 (zero) signifies flat response. The higher the
value, the stronger the mid frequency boost.
(3)MID f (midrange frequency):
Determines the center
frequency for cut/boost. The higher the value, the higher
is the center frequency.
(4)LOW (low range):
Adjusts the low frequency range. A
value of 0 (zero) signifies flat response. The higher the
value, the stronger the low frequency boost.
(5)LEVEL:
Determines the EQ module output level.
The LEVEL parameter allows compensation for the
change in output level due to a tone boost or cut.
When HIGH, MID, and LOW are all at the flat
setting, the LEVEL setting "5" produces the same
volume as EQ OFF.
If LEVEL is set too high, internal clipping may lead
to distortion. Adjust the LEVEL parameter to match
the input level.
This effect simulates the sound of a guitar amplifier. By
combining it with the PRE module, the sound of picking up
a guitar amp with a microphone can be convincingly recre-
ated.
Explanation
(1)COLOR:
Determines the frequency response of the
simulated amplifier.
1:
Flat response
2:
Vintage tube amplifier with emphasized midrange
3:
Modern amplifier with extended high and low range
(2)BOX:
Determines the type of simulated speaker
enclosure.
1:
Stack
2:
Combo
3:
Compact
(3)DEPTH:
Determines the amount of speaker box ringing.
Higher values will result in pronounced ringing which
occurs when an amplifier is operating at a loud volume.
When set to 0 (zero), there is no such speaker box
ringing, regardless of the selected box type.
This is an auto wah effect where the emphasized frequency
range changes according to the dynamics of the input signal.
Explanation
(1)FREQ (Frequency):
Determines the reference
frequency.
(2)SENS (Sensitivity)
: Determines the sensitivity of the
auto wah effect. The bigger the value, the bigger the
frequency change even at low volume levels.
EQ
AUTO WAH
Parameter 1
FREQ
1 – 64
Parameter 2
SENS
0 – 10
Parameter 5
LEVEL
1 – 8
3
AUTO WAH
EQ
AMP SIM
Parameter 1
COLOR
1 – 3
Parameter 2
BOX
1 – 3
Parameter 3
DEPTH
0 – 10
Parameter 4
TONE
-7 – +7
Parameter 5
LEVEL
1 – 8
2
AMP SIM (Amp simulator)
NOTE
HINT
EQ
EQ
Parameter 1
HIGH
-7 – +7
Parameter 2
MID
-7 – +7
Parameter 3
MID f
1 – 16
Parameter 4
LOW
-7 – +7
Parameter 5
LEVEL
1 – 8
1
EQ (Equalizer)
15
Mid f
LOW
MID
HI
0
Gain
Frequency
1
2
3
Equalizer Operation
