3
ENGLISH
A. Stand
B. On/off multifunction switch
C. Screen
D. DC jack
E. Headphone output
F. VGA input
G. HDMI Input
Accessories
1 x Monitor
1 x User manual
Installing the stand
Mount the base and stand neck with the supplied
matching screws. Now mount the stand neck to
the appropriate place on the back of the monitor
with the screws provided. Put the cover cap on the
screw connection.
Connections
POWER SUPPLY
Insert the DC plug of the power adapter into the
DC jack on the back of the monitor.
HDMI or VGA connection
Connect the appropriate connectors on the back
of the monitor to your computer or other suitable
players using appropriate cables.
HEADPHONE CONNECTION
Connect the headphones to the Headphone jack
of the device.
Note:
For sound reproduction additional
headphones or loudspeakers, possibly with their
own power supply, are required.
Attention
Danger!
Excessive sound pressure levels from
ear buds and headphones can cause hearing
damage. Listening to loud music for extended
periods of time may lead to hearing impairment.
Keep the volume at reasonable levels.
Operation
TURNING THE UNIT ON/OFF
Press the button to switch on the unit.
Note:
If you didn’t press any key within 4 hours, the
Monitor will power off automatically. You can
reset the power off time individually from
OFF
/
0
to
24
under the menu setting
Reset
.
General settings
MENU SETTINGS
With the device switched on, press the multifunction
switch to the right. The main menu opens. Press
the multifunction switch up or down to select the
desired submenu. To confirm your selection, press
the multifunction switch again to the right. You can
change the settings by pressing the multifunction
switch up or down. Confirm the setting by pressing
the multifunction switch again to the right.
By pressing the multifunction switch to the left, you
return to the corresponding upper menu. To close
the main menu, press the multifunction switch to
the left until it closes.
