Zoom GFX-707, Руководство по эксплуатации

Страница: 8 / 24

ZOOM GFX-707
Amp Simulator Settings
8
Amp
Simulator
Settings
1
In play mode, press the EDIT (CANCEL)
key.
2
Press the MODULE / keys repeatedly,
until the TOTAL module LED is lit.
3
Press the TYPE (BANK)
▼
/
▲
keys
repeatedly, until the indication "DIRLOD"
appears on the display.
4
Turn parameter knob 3.
As soon as you turn parameter knob 3, the
display indication changes to "AMPMOD" (amp
simulator mode). This is the parameter for
selecting the type of amp simulator.
5
Continue to use parameter knob 3 to
select one of the following settings.
Choose the setting that best matches your
setup.
• GFX-707 is connected to a guitar amplifier
AP
• GFX-707 is connected to line level equipment
such as a mixer, or used with headphones
Ln
When "AP" is selected, the amp simulator can
be used to simulate cabinet sound also when
using the guitar amplifier at low levels. When
"Ln" is selected, characteristics are optimized
for recording.
6
Press the EDIT (CANCEL) key once more.
The unit returns to the play mode. The AMPMOD
parameter setting applies to all patches.
The AMPMOD parameter is reset to "AP"
when the GFX-707 is turned off.
NOTE
The GFX-707 incorporates an amp simulator that recreates the sound of a guitar amplifier or speaker enclosure. This
section explains how to set up the amp simulator.
TYPE (BANK)
(GROUP)
BANK PATCH
(VALUE)
BOTH EDITED
PATCH NAME
PATCH NAME BANK PATCH
(VALUE)
BOTH EDITED
PARM3 knob
(VALUE)
BOTH EDITED
PARM3 knob
MODULE
(ON/OFF)
COMP•DIST ZNR/EQ MOD REV TOTAL
Setting Up the Playback Equipment
Selecting the Amp Simulator Type
To get the best out of the amp simulator, the playback equipment must be set up correctly.
Proceed as described below. After power-up, the GFX-707 is always set up for use with a guitar
amplifier. When a guitar amplifier is used exclusively, the following steps are not necessary.
Use the AMP SIM knob to select one of the following amp simulator types. When the knob is
operated, the name of the currently selected type is shown on the display, and the indication
A or b appears on the BANK/PATCH indicator.
• OFF
Amp simulator is turned off.
• COMBO A, b
This is a combo type amplifier simulation. The
"b" position will result in a stronger cabinet
sound.
• BRIGHT A, b
This is a combo type amplifier simulation with
a bright sound character. The "b" position will
result in a stronger cabinet sound.
• STACK A, b
This is a stack type
amplifier simulation. The
"b" position will result in
a stronger cabinet sound.
• FL STK A, b
This is a triple-decker stack type amplifier
simulation. The "b" position will result in a
stronger cabinet sound.
AMP SIM
OFF
COMBO
BRIGHT
STACK
FL STK