Model 26 Dialer
Specifications
Dialer Operation:
The Model 26 dialer makes phone calls through prepaid and dial-around services as easy to place as a local
call. The dialer can be configured to ignore local phone numbers, including local calls consisting of the digit "1"
plus ten following digits.
The dialer can output a dialing string of up to 96 digits, and act upon logical operators and observed events
such as pauses, or programmed detection of voice and/or tone prompts.
The dialer can route calls for up to eight prepaid service accounts or networks. The dialer can be set to: route
all calls; route calls preceeded by
*
; route calls preceeded by a Personal Identification Number.
Dialer Programming:
Simply place the dialer into Learn Mode
™
and dial a number using a prepaid service. The dialer remembers the
long distance access sequence, including access number, PIN and other variables in the dialing sequence
needed to place the prepaid call.
Tones detected:
DTMF (touch tones): 0 through 9, #,
*
, A, B, C, D; Voice and Dialtone
Dialing Speed:
Programmable tone duration of 50 ms to 250 ms
Dimensions:
Dialer: 3.3 inches by 2.6 inches by 1.25 inches
110 V adapter: 2.2 inches by 1.7 inches by 1.6 inches
Weight:
Dialer: 2.9 ounces
Power supply: 5.8 ounces
Connectors:
Two RJ-ll phone jacks
One DC power supply barrel connector, size 5.5mm outer diameter with a 2.1mm
inner diameter with positive center.
Status Reporting:
Line Polarity: Phone line on/off hook; Sending DTMF
Regulatory Compliance:
FCC Part 15B and Part 68, CE (EN55022, EN55024, EN60950), UL and CUL
Transformer Output:
22-24 Volt DC, 65 mA
Mounting bracket:
Provides for optional wall mounting by using the adhesive pad provided or by using
screws
Package Contents:
Dialer 26
Phone cord -18 inches (45 cm), RJ-11 to RJ-11 connectors
Mounting Bracket
Instruction Manual
Power Transformer
Compliance Flyer
0344DI26