Zoom BFX-708, Руководство по эксплуатации

Страница: 18 / 24

the instrument sound. When set to "oF", ZNR is disabled.
ZNR operates independently of the EQ module. The ZNR
setting will be active also if the EQ module is off, and the EQ
module and ZNR can also be used together.
This page of the 4-band equalizer allows adjustment from the
high range to the midrange.
Controls boost/cut in high range.
Controls boost/cut in mid/high range.
Controls boost/cut in mid/low range.
This page of the 4-band equalizer allows adjustment in the low
range.
Controls boost/cut in low range.
Adjusts volume level after passing EQ module.
(EQ page 2)
EQ P2
(EQ page 1) EQ P1
ZOOM BFX-708
MOD ( modulation) module
18
Effect
Types
and
Parameters
This module comprises spatial effects such as chorus and flanger, filter effects such as auto wah, and modulation effects such as ring
modulator.
This stereo chorus effect produces a clear and very wide sound
stage.
Adjusts effect depth.
Adjusts modulation speed.
Adjusts effect mix ratio.
This chorus effect is characterized by warm and smooth sound.
This effect produces a unique, undulating sound.
Adjusts effect depth.
Adjusts feedback level. Increasing this value in the plus or minus
direction emphasizes the distinctiveness of sound, but with
different tonal character.
This effect results in a swooshing sound.
Selects connection order of COMP•DIST module and MOD
module, as follows.
AF: COMP•DIST
→
MOD
bF: MOD
→
COMP•DIST
Selects phase sound type.
This effect periodically varies the level of the sound.
Adjusts modulation waveform clip. Larger values result in more
intense modulation.
This is a combined octave and chorus effect.
Adjusts chorus effect depth.
Adjusts chorus effect mix.
Adjusts octave effect mix.
This combines an auto-wah effect with an octave effect. Should
be used with single notes.
Controls DIST module and MOD module connection order and
wah tone.
AF:
Module connection order is COMP•DIST
→
MOD.
Results in fat-sounding wah.
Ar: Module connection order is COMP•DIST
→
MOD.
Results in colorful wah.
bF:
Module connection order is MOD
→
COMP•DIST.
Results in fat-sounding wah.
br: Module connection order is MOD
→
COMP•DIST.
Results in colorful wah.
Adjusts sensitivity of wah effect. Negative values result in
downward wah.
Adjusts octave effect mix.
Combines a pedal wah effect with an octave effect. Should be
used with single notes.
Controls DIST module and MOD module connection order and
wah tone.
Adjusts wah effect center frequency.
The octave effect in effect types 6 - 8 detects the pitch of the
input sound to the BFX-708 sound and creates a one- octave
lower component.
This is a special effect with step-like filter characteristics.
Adjusts depth.
Adjusts effect intensity.
This is a pitch shifter with a range of 1 octave up and 2 octaves
down.
Sets the pitch shift amount. The "dt" setting results in a detune
effect.
Adjusts effect tone.
Adjusts balance between effect sound and direct sound. Higher
values emphasize effect sound.
This effect lets you vary the pitch in real time, using the
expression pedal.
Selects the pedal pitch type. Depending on the type, the pitch
when pushing the pedal down or when raising it differs.
P-PIT (Pedal Pitch)
TYPE 11
PITCH (Pitch Shifter)
TYPE 10
STEP
TYPE 9
PWAH/O (Pedal Wah/Octave)
TYPE 8
AWAH/O (Auto Wah/Octave)
TYPE 7
CHO/O (Chorus/Octave) TYPE 6
TREMOL (Tremolo)
TYPE 5
PHASE
TYPE 4
FLANGE (Flanger)
TYPE 3
V-CHO (Vintage Chorus)
TYPE 2
CHORUS
TYPE 1
NOTE
DEPTH 0 – 10 Parameter 1
RATE 1 – 30 Parameter 2
MIX 0 – 30 Parameter 3
DEPTH 0 – 10 Parameter 1
RATE 1 – 30 Parameter 2
MIX 0 – 30 Parameter 3
DEPTH 0 – 10 Parameter 1
RATE 1 – 30 Parameter 2
FB -10 – 10 Parameter 3
DEPTH 0 – 10 Parameter 1
RATE` 1 – 30 Parameter 2
CLIP 0 – 10 Parameter 3
CHODEP 0 – 10 Parameter 1
POSI AF, bF Parameter 1
RATE 1 – 30 Parameter 2
COLOR 1 – 4 Parameter 3
SENS -10 – -1, 1 – 10 Parameter 2
OCTMIX 0 – 30 Parameter 3
POSI/C AF, Ar, bF, br Parameter 1
FREQ 1 – 10 Parameter 2
OCTMIX 0 – 30 Parameter 3
DEPTH 0 – 10 Parameter 1
RATE 1 – 30 Parameter 2
RESO 0 – 10 Parameter 3
PITCH -12, ...- 1, dt, 1,... 12, 24 Parameter 1
TONE 0 – 10 Parameter 2
BAL 0 – 30 Parameter 3
TYPE 1 – 16 Parameter 1
HIGH -12 – 12 Parameter 1
HI-MID -12 – 12 Parameter 2
LO-MID -12 – 12 Parameter 3
LOW -12 – 12 Parameter 1
LEVEL 1 – 8 Parameter 2
NOTE
CHOMIX` 0 – 30 Parameter 2
POSI/C AF, Ar, bF, br Parameter 1
OCTMIX 0 – 30 Parameter 3