Zoom 4575 Скачать руководство пользователя страница 35

Страница: 35 / 56

+CMGS 00

Where 00 is the message reference number.

Creating a PDU can be complicated. Fortunately there are online convertors that can
help you create the PDU.

http://smstools3.kekekasvi.com/topic.php?id=288

and

http://rednaxela.net/pdu.php

are good examples of the tools available online to help you

create a PDU

Receiving an SMS Message

Before you receive an SMS message, you need to decide how you want to be notified
when an incoming text message arrives. This is done using the

AT+CNMI

command. If

you do not want the modem to pass a message to your application, enter

AT+CNMI=0,0

When using this setting, the modem does not report incoming texts to your application.
You can enter

AT+CMGL

to check to see if the modem has any unread texts.

If you want the modem to notify you of an incoming text, use the

AT+CMNI=2,1

command. When the modem receives a text, it will notify your application with the

+CMTI: SM, <index>

result code, where

stands for SIM

and

<index>

is the location

in the SIM memory. For example:

+CMTI: “SM”, 3

Tells you that the modem just received a text and it’s stored on the SIM card in location
3. To read this message you use the

AT+CMGR

command. For example, to read the

message in the example above, enter:

AT+CMGR=3

The modem will respond with the SMS message that was just received and stored in
location

. For more information about these commands, please refer to the Huawei AT

Command manual available at

www.zoomtel.com/4575support

If the message was sent in PDU format, it will appear as a series of hex numbers that
you will need to decode. There are several online sites that will help you decode the

Содержание 4575

























































Результаты поиска

Содержание 4575

Отзывы:

Бренды по названию

Популярные бренды

Zoom 4575, Руководство пользователя

Результаты поиска

Содержание 4575

Отзывы:

Бренды по названию

Популярные бренды