Zoom 1065, Руководство пользователя

Страница: 18 / 66

Manually configuring the modem requires that you log in to the
Zoom Configuration Manager and enter information on its
Basic Setup page. (If you need help logging in, see page 13.)
1
On the Basic Setup page, ensure that the MANUAL option
button is selected.
2
Do the following, depending on whether you know your VPI ,
VCI , and Encapsulation settings:
¾ If your Internet service provider gave you the settings,
continue with step 3 below.
¾
If you do not know the settings, refer to the ADSL
Internet Settings Tables beginning on 45. Find your
service provider on the list and make note of its settings. If
there is more than one listing for your service provider, the
most common one is labeled (1), the next (2), and so on.
Tip:
If you are in the United States and your service provider is
not on the list, use the settings for
Service Provider Not
Shown at the bottom of the table.
3
Select Enabled from the Current Connection drop-down
list. (That is, click the arrow at the far right of the box to
view the items in the list, then select Enabled .)
4
Select your service provider’s Encapsulation setting from the
Encapsulation drop-down list. Depending on your selection,
do the following:
¾
If your Encapsulation setting begins with PPP: Enter your
Username and Password in the boxes provided. Your
Internet service provider should have given you a User ID
or User Name (usually your email address or the characters
preceding the @ sign in your email address) and a
Password. (These are NOT the same User Name and
Password you that you used earlier to open the Zoom
Configuration Manager.)
18 ADSL X5 User Guide