Zoofari ZTPS 6 C1, Инструкция по эксплуатации и правила безопасности

Страница: 12 / 86

Zoofari ZTPS 6 C1
10 - English
want to use the claw clipper (11). Please note that 2 people are usually needed to clip an animal's
claws.
The fur comb (12)
This fur comb (12) is especially suitable for combing guard hair. After bathing your pet, first comb
its guard hair with the coarse side of the comb and then with the fine side. You remove knots and
make its fur sleek.
The claw file (13)
Use this claw file (13) after trimming your pet's claws in order to remove burrs and damage to the
claws and to make them even. Please note that 2 people are usually needed to file an animal's
claws.
The fur scissors (14)
With the fur scissors (14), you can trim your pet's fur even in places which are not easily accessible
with the pet hair clippers (1).
If you have never previously cut or trimmed your pet 's fur, try to obtain in advance as much
information as possible on the subject.
If necessary, consult a vet or a professional animal keeper.
8. First use
DANGER! Never use the pet hair clippers (1) in the vicinity of the bath / shower or
over a sink filled with water. Proximity to water poses a risk of electric shock, even if the
device is switched off.
The sizes 3, 6, 9, 12mm are imprinted on the attachment combs (3, 4, 5, 6) to facilitate
differentiation.
8.1 Attaching / removing attachment comb
To attach or remove an attachment comb (3, 4, 5, 6), proceed as follows:
Attaching comb (3, 4, 5, 6):
1. Place the selected attachment comb (3, 4,
5, 6) down centrally on the shaving head.
2. Slide the locking mechanism of the
attachment comb (3, 4, 5, 6) over the lower
side of the shaving head until it engages, as
shown in the illustration.
You attach the blade protective cover (2) in the
same manner.