Zoofari 353146 2007, Инструкции по эксплуатации и безопасности

Страница: 22 / 94

22 GB/IE
Claw clipper
12
:
Use the claw clipper
12
to trim pet claws.
The locking mechanism secures the claw clipper
12
in the closed position. Release the lock when using
the claw clipper
12
.
Note: It is recommended that 2 people shorten
the claws.
Fur comb (double-sided)
13
:
After bathing your pet, first use the coarse side of
the fur comb
13
and then the fine side to comb
your pet’s guard hair and remove knots from the fur.
Claw file
14
:
Use the claw file
14
after you have trimmed your
pet’s claws with the claw clipper
12
to remove
cracks and damage.
Note: It is recommended that 2 people file the
claws.
Fur scissors
15
:
Use the fur scissors
15
to cut your pet’s fur even in
places that are difficult to reach with pet hair clippers.
Cleaning and care
DANGER! ELECTRIC SHOCK!
Before cleaning, remove the plug from the
mains power socket.
CAUTION! PROPERTY DAMAGE!
NEVER submerse the product in water or other
liquids.
Do not use any corrosive or abrasive cleaning
agents.
Clean the housing using a damp cloth and a
mild detergent.
Switch the product off by sliding the ON / OFF
switch
5
to the “0“ position.
Remove the plug from the mains socket.
Remove the trimmer guide
6
or the cutting
head
1
from the product (see Fig. E and F).
Note: Put the blade cover
7
on cutting
head
1
before removing it from the product.
Note: Never untighten the screws on cutting
head
1
.
Wash the trimmer guide
6
or the cutting
head
1
with running water if necessary.
Dry the trimmer guide
6
and cutting head
1
.
Remove any remaining bits of hair from the
cutting head
1
and product by using the
cleaning brush
8
provided (see Fig. G and H).
Apply one or two drops of blade oil
9
between the blades and the moving parts
(see Fig. I).
Adjust the adjustment switch
4
to 1.8 mm
after you have finished cleaning the product,
before install back the cutting head
1
to the
product with click sound (see Fig. J).
Note: Clean the cutting head
1
, trimmer
guide
6
after every use.
Troubleshooting
Error Cause Solution
Trimming is
difficult. Hair may
be stuck
inside the
blades. Clean the cutting
head
1
and the
product and oil it
if necessary.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.