Zoofari 309786, Руководство по сборке

Страница: 6 / 20

6
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety informa-
tion carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Package contents/parts list
(Fig. A)
1 x baseplate (1)
1 x bed area (2)
2 x bed plate, small, 30cm (3)
1 x feather playing ball (4)
1 x bed plate, large, 40cm (5)
1 x cat den (6)
2 x sisal band (7)
1 x set of steps (8)
1 x ceiling attachment (9)
1 x stabiliser, small (10)
1 x stabiliser, large (11)
1 x sisal column with screw (12)
6 x sisal column (13)
1 x scratching brush (14)
1 x screw, M8 x 20mm (15)
4 x screw, M8 x 40mm (16)
4 x screw thread (17)
1 x Allen key (18)
1 x assembly instructions
Technical data
Total dimensions:
approx. 40 x 240–260 x 40cm (W x H x D)
8
Maximum load: 8kg
Date of manufacture (month/year):
08/2019
Intended use
The product serves as an indoor scratching
post for cats. The product is not intended for
commercial use.
Safety information
Important: read these assembly instruc-
tions carefully and keep them in a safe
place!
Life-threatening hazard!
• Never leave children unattended with the pack-
aging materials. There is a risk of suffocation.
• The product is not a toy or a climbing appa-
ratus! Ensure that persons, especially children,
do not pull themselves up on the product or
stand on it. The product can tip over.
Risk of injury!
• Make sure the product is properly stabilised
before use!
• Place the product on a level and solid surface.
Do not place it near stairs.
• Do not place hazardous items like candles on
or near the product.
• Check the product regularly for wear. Check
regularly to make sure all screws are tight! The
product should only be used if it is in perfect
condition!
• The product may only be used for its intended
purpose.
• Do not exceed the maximum load capacity.
• The product is intended for solid ceilings only,
and is not to be used with suspended ceilings.
Assembly
1. Remove the packaging and lay out all the
parts of the product on the floor.
2. Assemble the product according to Figs. B–E.
Note:
if the ceiling height is 240–250cm, use
the small stabiliser (10) as shown in Fig. C.
If the ceiling height is 250–260cm, use the large
stabiliser (11) as shown in Fig. D.
3. Use the ceiling attachment (9) to tightly fasten
the product between the ceiling and the floor.
4. Fasten the ceiling attachment with the wing
nuts (Fig. C/D).
GB/IE