ASSEMBLY & OPERATION:
1. Remove contents from package and inspect for damage. If any parts are missing or damaged, contact Zoo Med’s customer
service department immediately.
2. Thoroughly rinse the waterfall and place the waterfall in your terrarium.
3. Fill the reservoir with water. (Note: Use Zoo Med’s Reptisafe® Water Conditioner to remove harmful chlorine or chloramines from tap water.)
4. Connect the LED power supply
5. Feed the LED power supply and circulation pump cords out of the terrarium and plug in to a GFCI (Ground Fault Circuit Interrupter) outlet.
MAINTENANCE:
Regular cleaning of the waterfall and pump is recommended.
1. Prior to any work, disconnect all electrical devices from power source.
2. Remove the waterfall from the terrarium and remove the pump from the
compartment in the back of the waterfall.
3. Access the impeller by removing the pump and impeller covers. Remove the impeller
by grasping one fin with tweezers and gently pulling it out of the pump housing. Clean
the impeller and impeller chamber.
4. Reassemble the pump and return it to the compartment.
5. Attach the tube to the pump and replace the compartment cover.
6. Return the waterfall to the terrarium, fill with water and plug in.
HELPFUL HINTS:
- Fill the reservoir with water before the pump is plugged in. Filling the waterfall while it is operating may cause it to overflow when it is
shut off.
- Both the waterfall circulation pump and LED lights may be controlled with a timer.
WARRANTY:
Zoo Med Laboratories, Inc. (Zoo Med) warrants each
REPTI RAPIDS™ LED Waterfall
to be free of defects in material and workmanship
under normal use and service for 12 months from the date of purchase. The obligation under this warranty is limited to the repair or
replacement, at Zoo Med’s discretion, of the product or any part thereof, when the product is returned to Zoo Med, freight prepaid. No claim
shall be allowed under this warranty if, in the opinion of Zoo Med, this product has been subject to accident or improper usage, including but
not limited to: water damage, improper storage, accidental dropping, etc. This warranty is in lieu of all other warranties and representations
express or implied. Please include your receipt, full name, address, phone number, and email address along with a note explaining failure
when sending any product back to Zoo Med. Please allow 4 to 6 weeks for repair or replacement.
Pump
Impeller cover
Pump cover
Impeller
ZOO MED LABORATORIES, INC.
- 3650 Sacramento Dr. - San Luis Obispo, CA 93401 - Email: [email protected]
www.zoomed.com
