There is two kinds of situation for Bluetooth and computer connection.: a, The computer have built in
bluetooth,can use bluetooth software to connect b, If the computer don't have bluetooth, need to insert USB
dongle and install IVT bluetooth drive software. Below is the instruction for the last kind:
1.Installing the IVT bluetooth drive software
2.USB dongle insert into computer USB port ( better to insert into the computer front USB port)
3.Headset into pairing status.
4.Start-up IVT Bluetooth drive software in the computer,click " Refresh Equipment" in "View Menu",start to
search the bluetooth equipment.
5, After searching,then you can find the "B50"in equipment list,choose"B50" in the list,and click right mouse
button,click"connection",then appeared two options: a,Bluetooth high quality audio service( use to listen music) b,
Bluetooth headset service (use to voice chat), after select the service needed,the computer will required to input
pairing code,please input the Pin-Code “
0000
” to pair. If select headset service, to accept connection by press
multifunctional button after headset issue a beep with red&green light flashing together.If select audio service,no
need to press button but connect automatically.
6.
,After pairing successfully,the green light in headset will be flash, you can enjoy the computer's music or voice
chatting then.
Remark:
a.Base on different design for different computer or TVT edition, the connection and function will be
different.
b.When using TVT software to connect Bluetooth,please select right Bluetooth service, forbid to
connect audio and headset at the same time, Otherwise may cause problems such as silent call.
H. Low power alarm:
As the battery voltage is lower than 3.3 V,the red light will flash twice rapidly
every 30 seconds,and issue a beep,as the battery voltage is lower than 3.0V,the headset will shut-off
automatically,please charge it as quickly as possible.
I: Off automatically:
Headset will automatically shut-off after no pairing for 3 minutes.
J. Resetting:
If the headset can not turn off, can be reset to normal condition by charging.
K: Audio input/output:
1. Under shut-down status,connect 3.5mm
audio cable to 3.5mm jack on h
eadset, it can be used as
a normal wired headset.
2. During playing,using 3.5mm audio cable,output MP3 or FM audio signal to other audio
system equipments,then enjoy listening more rock musics.
L. Important information
