-
18
-
Network >> Network
IP Setting
allows you to select an IP address mode to set up the configuration
accordingly.
-
DHCP:
Select this option when your network uses the DHCP server. When ZVC7610
starts up, it will get from the DHCP server automatically.
-
Static IP:
Select this option and enter an IP address manually. You can use IP Finder
to obtain the setting values.
IP
Enter IP Address of ZVC7610
Default IP Address: 192.168.0.30
Subnet Mask
Enter Subnet Mask of ZVC7610
Default Subnet Mask: 255.255.255.0
Default
Gateway
Enter Default Gateway of ZVC7610
Default address: 192.168.0.1
Primary/
Secondary
DNS
DNS (Domain Name System) translates
domain names into IP addresses. Enter the
Primary and Secondary DNS that provided
by ISP.
-
PPPoE:
Select this option when you use a direct connection via the ADSL modem.
Enter your PPPoE Account
User Name
and
Password
. ZVC7610 will get the IP
address from your ISP when starting up.
NOTE: When setting up the IP Setting with PPPoE account, ZVC7610 gets the IP address
from your ISP during start up and will send a notification email to you automatically.
Therefore, you have to setup email/DDNS in advanced when using PPPoE as your
connection type.
