- 2 -
2
Setting Up the Camera
Installing the Camera Stand
ZVC7610/ZVC7610W comes with a Camera Stand. It uses a swivel ball screw
head to lock to the camera’s screw holes. Attach the Camera Stand and you
can place the unit anywhere by mounting the camera through the three screw
holes which located at the bottom of the Camera Stand.
The Camera Stand
Connect ZVC7610 to your Network (LAN)
Use the provided RJ-45 Ethernet cable to connect the ZVC7610 to your local
area network (LAN).
ZVC7610 will power ON automatically after the AC Power Adapter is connected.
You may also verify the power status from the Power LED on the front panel.
The Link LED will start flashing in green light. ZVC7610 will be on standby
mode and it is ready to use.
