It is recommended that ZUB8300 and phone distance is as close as possible with no solid
objects in between.
NOTE: Most cell phones show a Bluetooth linkage symbol on the display screen. Once
ZUB8300 and phone have successfully paired, you are ready to make and receive calls.
Adjust the position of ZUB8300
You can loosen the FIXING SCREW to adjust the ZUB8300 to fit your car. You can also adjust
MICROPHONE tube to increase sound sensitivity.
AUTO ANSWERING or MANUAL ANSWERING
Switch it up or down for selecting AUTO ANSWERING or MANUAL ANSWERING for an
incoming call.
If “M” appears on the switch it means that MANUAL ANSWERING is enabled. Answer the call
using the answer button on the kit.
If “A” appears on the switch it means that AUTO ANSWERING is enabled. The call will answer
automatically after 1 - 3 rings or depends upon your cellphone setting.
Turning ZUB8300 ON and OFF
To switch the ZUB8300 on, just plug the ZUB8300 into a car cigarette jack and turn on the
engine. You will hear a “do do” sound and the back lights of the buttons will turn on.
To switch ZUB8300 off, just take ZUB8300 out of the cigarette jack or turn off the engine. The
lights on the buttons will turn off.
3
When the ZUB8300 powers on, it will automatically try to find the paired cell phone. Then, it will
link with the cell phone if it is on and the Bluetooth function is activated. If the paired cell phone is
off or Bluetooth is off, it is necessary to select the ZUB8300 car kit in the cell phone and connect
manually after the cell phone is power on. Please refer to cell phone user manual. Alternatively
simply remove the kit from the cigarette socket and replace.
Making a Call
1. Dial the phone number using the keypad on the cell phone.
2. To send the call, press the phone's SEND/CALL key.
3. The call will then be transferred automatically to the ZUB8300 when the connection is made.
NOTE: It is recommended to keep the distance between car kit and cell phone to at least 30 cm
to avoid cell phone power interference which may cause noise during conversation.
Voice dialing
If your Bluetooth phone supports voice dialing, you can use this feature with ZUB8300. Please
refer to your phone's user guide for more information on setting up and recording voice
commands.
The procedures for using voice dialing are below:
A.
Voice dialing function on your phone must be turned on and voice tags must be stored.
B.
Make sure that ZUB8300 is turned ON.
C.
On the ZUB8300, press the TALK button once whilst in standby mode.
D.
A short tone “do” will prompt you to speak the voice tag that was previously stored in the
phone’s voice dial phone book.
E.
The phone automatically dials out the contact you’ve selected.
F.
When connected, you can speak as usual by using ZUB8300.
NOTE: Voice dialing is available for those phones which have a voice dialing function. It is a
must to record voice tags in a quite environment directly into your phone.
Answer and Reject a call
If there is an incoming call, the ring tones will sound from ZUB8300. If ZUB8300 is in auto
answering mode, ZUB8300 will take the call automatically after few ring tones depends upon
your cellphone setting. If ZUB8300 is in manual answering mode, just press the TALK button
once to pick up the call.
While in MANUAL ANSWERING mode if you wish to reject an incoming call, press once the
HANG UP button on the ZUB8300. Please note, this function only works on Bluetooth phones
that supports HANDSFREE profile. For HEADSET mode, rejecting a call must be done from the
cell phone.
4
