5
2.4 Hardware Connection
Note: Before connecting ZSR4174WE, be sure to power off your computer, DSL/Cable modem,
and ZSR4174WE.
1.
Connect one end of the cable to
your broadband router, PC or
Switch/Hub port and connect the
other end to the LAN port of
ZSR4174WE.
2.
Power on ZSR4174WE by
connecting one end of supplied
USB cable to the power socket of
ZSR4174WE and connecting the
other end with power adapter
applied to the wall socket or USB
port of PC.
3.
Power on your wireless device.
4.
Please check all LEDs on the top panel.
Corresponding Mode LED should be steadily on
(Default Mode is AP mode)
LAN/WAN LED should be flash if the computer / network
device connected to the ZSR4174WE is powered on and
correctly connected.
Note:
If any LED you expected is not on, please recheck the
cabling, or jump to
Troubleshooting
in User Manual
for possible reasons and solution.
All manuals and user guides at all-guides.com
