USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 1.0
27
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Reset Click
the
Reset
button to abort change and recover the
previous configuration setting.
3.3.11
WAN Interface Setup
This page is used to configure the parameters for wide area network that
connects to the WAN port of your WLAN Broadband Router. Here you may
change the access method to
Static IP
,
DHCP
,
PPPoE
or
PPTP
by click the
item value of
WAN Access Type
.
I
Static IP
Screen snapshot – WAN Interface Setup – Static IP
Item
Description
Static IP
Click to select Static IP support on WAN interface. There
are IP address, subnet mask and default gateway settings
need to be done.
IP Address
If you select the Static IP support on WAN interface, fill
in the IP address for it.
Subnet Mask
If you select the Static IP support on WAN interface, fill