Zonestar Z6, Руководство пользователя, Страница: 10 / 13

Prepare to print - Load Filament
11
Preheat nozzle: Choose “Prepare”>> “Preheat PLA”, then nozzle and hotbed will be heated.
Waiting nozzle temperature reached to setting.
If there is filament in the hotend, do this step, otherwise skip this step.
Choose “Prepare”>> “Move axis”>>”Extruder”>>”Move 1mm”>>”extruder: ****mm”, then
Clockwise rotate the knob slowly
, until you can see the filament flow from the nozzle.
1
2
3
If there is filament in the hotend, do this step, otherwise skip this step.
Press the handle on the extrude feeder and pull out the filament.
4
Press the handle on the extrude feeder and insert filament, make sure the filament has been
inserted to the hotend.
Choose “Prepare”>> “Move axis”>>”Extruder”>>”Move 1mm”>>”extruder: ****mm”, then
Clockwise rotate the knob slowly
, until you can see the filament flow from the nozzle.
5
Use a diagonal pliers
to cut off the head of
filament
Press the handle and
insert filament into
the extruder engine
When loading filament, make sure it has entered the
hotend, if it clog in extruder or hotend, try to remove
the fittings and load the filament again.
Filament NOTE
Extrude engine
PTFE tube
PTFE fitting
PTFE fitting
NOTE