USER'S MANUAL
USER'S MANUAL
3-1-3. Bluetooth
As a global open standard, Bluetooth is an excellent wireless data
comunication technology. There is no need for bluetooth equipments to
transfer data of strict poistion and that differs from IrDA.It supports not
only point to point but also point to multipoints(Seven points for max).
This model is compatible with Bluetooth 2.0 standard and with power level
of Class 2. The original password of this model is
1234
. While printing,
the host and printer should be of distance less than 10 meters. If there is
any obstacle or EMI between host and printer, distance of less than 5 meters
is required.
3-1-2. USB Connection
3-2. Connect the cables
3-2-1.
Connect the AC recharger to the printer to recharge the battery
NOTE:To remove the DC cable connector, make sure that the power
supply`s power cord is unplugged; then grasp the connector and
pull it out straightly .
3-2-2. Connect the RS-232 port or USB port
Connect the Host Computer (POS/ECR) to the priter using an interface
cable that matches the specifications of the printer and the Host computer
(POS/ECR).
1). Turn off both the printer and the Host computer (POS/ECR).
2). Plug the interface cable connector into the printer's interface connector.
3). Plug the other cable head into the Host computer(POS/ECR).
4). Turn on the Printer and Host computer(POS/ECR).
Pin No
1
2
3
4
.
Signal name
VCC
D-
D+
GND
Direction
+ 5V DC
Data -
Data +
Ground
USB
RS-232
