GENERAL DESCRIPTION
The unit is supplied fully wired and programmed from factory to perform a check at a variable flow.
The module consists of the following sections: G4 prefilter, GRSystemTM gas filter, fan and H14 absolute filter.
The figure below shows the main components of the module.
Airflow
Airflow
Airflow
Airflow
PREFILTER AND
GRSYSTEM SECTION
FAN
SECTION
ABSOLUTE FILTER
SECTION
1- Pressure switch connection cable
(black with 2 terminal blocks joined together)
2- Daitsu by Zonair3D
TM
air quality probe connection cable
(probe not included), with 4 marked terminals, 5 and 6
attached to strip, 17 and 18 (attached
to strip)
3- 230 V network cable (2 earth)
4- Main ON/OFF switch
5- PCB registration cover (4 M5 bolts)
6- H14 positive pressure tap
7- Differential pressure switch
8- Connection to the H14 positive pressure switch
9- M5 threads for fixing the anchor brackets
10- H14 negative pressure tap
11- Connection to the H14 negative pressure switch
12- Red LED to indicate HEPA14 filter change
Maintenance
Maintenance
Airflow
Airflow
PRODUCT
RANGE
FLOW
(m
3
/h)
UNIT DIMENSIONS
H x W x L (mm)
CONSUMPTION
(KW)
VOLTAGE AND
FREQUENCY
WEIGHT
(kg)
Pressure available
(Pa)
PAR 100
160-120
207.2 x 577.2 x 985
0.028 (1 unit)
230 V - 50/60 Hz
45.5
100
PAR 300
300-220
207.2 x 577.2 x 985
0.056 (2 units)
230 V - 50/60 Hz
46
100
Thank you for choosing Daitsu by Zonair3D
TM
products.
Please take a few minutes to read this manual carefully before
using your PURE AIR RESIDENTIAL.
