Zonair3D AIR+ 600, Руководство пользователя

Страница: 27 / 32

27 | Air+ 600
INSTRUCTIONS FOR FITTING THE FILTERS AND CLOSING THE PURIFIER
1. Place and center the absolute filter in its right position, and tighten all 4 locks
to the maximum
2. Slide the GRSystem fully along the side guides
3. Slide the prefilter fully along the side guides
4. Place the upper panel in the correct position. Then tighten the 6 screws that will
seal the unit
Please, contact Zonair3D
TM
or your local distributor for replacements.
IMPORTANT: It is important that only original filters supplied by Zonair3D
TM
are
used to ensure the desired result and correct operation of the unit.
The use of filters not supplied by the manufacturer will render the warranty null
and void.
MANAGEMENT OF USED FILTERS
The filters from this purifier must be taken to your local green point to be disposed
of correctly, so that they can be managed sustainably and do not create problems
for the environment.
DISPOSAL OF OLD ELECTRICAL APPLIANCES
European directive 2012/19/UE on Waste Electrical Equipment (WEEE), specifies
that old household electrical appliances must not be disposed of with the normal
unsorted municipal waste.
The crossed out "wheeled bin" symbol reminds you of your obligation to
dispose of the appliance correctly.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.