Zon Hyperbass Скачать руководство пользователя страница 11

Страница: 11 / 21

G U I T A R S

ZP-4

MODELS: Sonus 4/2 & 5/2

Description:

Class A design with studio-grade compo-

nents on a printed circuit board

Function:

Active master volume, pickup blend. Bass,

treble and internal midrange boost/cut

Specifications:

Output level +16dBm. S/N ratio 100dB

Power requirements:

One 9-volt battery

Battery life expectancy:

200 hours continuous use

About the system

Volume control.

Unlike passive volume controls that decrease the volume

by shorting some of the signal to ground, causing degradation in tone, the

active volume control on the ZP4.3 allows the volume to be set to any level

without overall loss of highs or tonal change. Play a note, let it ring while

slowly turning this control up and down, and you’ll hear no change in tone.

Pickup blend control.

Buffered inputs provide exacting control over

blending the neck and bridge pickups. This feature allows even the most

subtle blend, for a greater variety of tone. Turning the control clockwise

brings in the bridge pickup. Turning the control counterclockwise brings in

the neck pickup. The detent, or “click,” in the center of the control is the

point where both pickups are on equally.

Bass control.

15dB boost or cut of bass at a center frequency of 30 Hz.

Turning the control clockwise boosts the bass. Turning the control counter-

clockwise cuts the bass. The detent, or “click,” in the center of the control

is the “flat” position, zero boost or cut.

Internal midrange control.

15dB boost or cut of midrange at a center fre-

quency of 330 Hz. Turning the control clockwise boosts the mids. Turning

the control counterclockwise cuts the mids. The midpoint in the control’s

sweep is the “flat” position, zero boost or cut.

Treble control.

15dB boost or cut of treble at a center frequency of 3kHz.

Turning the control clockwise boosts the treble. Turning the control coun-

terclockwise cuts the treble. The detent, or “click,” in the center of the con-

trol is the “flat” position, zero boost or cut.

Gain trimmer.

Attenuates overall output level. Factory setting is mid posi-

tion.

Caution:

Setting gain too high may cause distortion.

MID FREQ

GAIN
TRIM

9-V

olt Batter

Master volume

Pickup blend

Treble (center)

Bass (outer ring)

Gain trimmer

Internal midrange control

Содержание Hyperbass






















Результаты поиска

Содержание Hyperbass

Отзывы:

Похожие инструкции для Hyperbass

Бренды по названию

Популярные бренды

Zon Hyperbass, Руководство пользователя

Результаты поиска

Содержание Hyperbass

Отзывы:

Похожие инструкции для Hyperbass

Бренды по названию

Популярные бренды