background image

G U I T A R S

1

Contents

Birth certificate ........................................................................................2

Introduction ..............................................................................................3

Caring for your new Zon bass..................................................................4

Adjustments..............................................................................................5

Bridge ................................................................................................5

Pickups ..............................................................................................6

About set-up........................................................................................8

Important note about truss rod adjustment ........................................9

Truss rod adjustment for Mosaic ........................................................9

Truss rod adjustment for Mosaic Pro................................................10

Electronics ..............................................................................................11

ZP-2S................................................................................................12

ZP-2D & ZP-2DM..............................................................................14

ZP-3D ..............................................................................................16

Internal controls ..........................................................................18

Piezo EQ ....................................................................................18

ZP-4 ..................................................................................................20

ZB-2 ..................................................................................................22

ZB-3 ..................................................................................................24

ZB-4.0 & ZB-4.3................................................................................26

ZB-5 ..................................................................................................28

ZB-6 ..................................................................................................30

ZDP 1 & ZAP-3 ................................................................................32

ZAP-1................................................................................................34

S2 Lightwave ....................................................................................35

Calibration instructions for S2 Lightwave system ......................37

Piezo voicing DIP switch settings ..............................................37

Preliminary optical alignment ......................................................39

Intonation ....................................................................................39

Warranty ................................................................................................40

Parts & Update Information....................................................................40

© 2005 Zon Guitars.

Owner’s Guide

Sonus
Legacy
Mosaic

Operating Instructions and Warranty

G U I T A R S

Содержание Hyperbass






















Отзывы: