Zomodo KTC019, Инструкция пользователя

Страница: 3 / 4

KTC019 KTC019
SINK W
ALL
W
ALL
Insert the faucet into the countertop and
ensure the O-ring (25) is secure in the groove
of the faucet body. Then slide the washers
(26 and 27) onto the threaded body of the
faucet followed by the nut (29) in the order
shown in the diagram. Tighten the nut (29)
by hand and ensure the faucet is correctly
aligned above the countertop.
Step 3
Locate a hole centre in the countertop at
least 50mm from the wall and with enough
clearance to the rim/flange of the sink.
Dim. A >50mm(2”) and Dim. B >50mm (2”) .
If you need to locate the faucet within these
dimensions, you should ensure enough
clearance for the mounting washers and
nut (26,27,29). Cut a hole 35 to 40mm
diameter into the countertop .
Step 2
Attach the hoses (32) to the Connection tube
(30,31) and tighten firmly. Do not use thread
tape, as the water-tight seal is provided by
O-rings. Do not over tighten.
Step 1
Note: Use the hose with RED braid-strands
for the hot water connection. Connect hot
water to the rigid pipe with red marking.
SINK W
ALL
W
ALL
A
B
Flush the wall valves to ensure no grit enters
the faucet. Now attach the hoses to the wall
valves ensuring the hose with RED braid
attaches to the hot water outlet.
Step 4
HOT
COLD