background image

FTC015

FTC015

Insert the faucet into the countertop. Then 
slide the washers (9 and 10) onto the threaded 
tube (8) of the faucet followed by the nut (11) 
in the order shown in the diagram. Tighten the 
nut (11) with a wrench and ensure the faucet is 
correctly aligned above the countertop. 

Step 3

Tighten the converter (12) and filter 
connector (14) with a wrench, 

ensure 

washer (13)  is between the converter (12) 
and filter connector (14). Then connect filter 
hose to the filter connector(14).

Step 4

SINK W

ALL

W

ALL

Remove the Filter connector (14), disassemble 
other parts in sequence (9) (10) (11) (12) (13). 
Ensure threaded tube (8) is tight in the faucet 
body (4).

Step 1

Locate a hole centre in the countertop at 
least 50mm from the wall and with enough 
clearance to the rim/flange of the sink. 
Dim. A >50mm(2”) and Dim. B >50mm (2”) . 
If you need to locate the faucet within these 
dimensions, you should ensure enough 
clearance for the mounting washers and 
nut (9,10,11). Cut a hole 26mm diameter 
into the countertop . 

Step 2

SINK W

ALL

W

ALL

A

B

SINK W

ALL

W

ALL

(1”)

Отзывы: