ZOLL AutoPulse NXT, Руководство пользователя

Страница: 81 / 85

Appendix C. Technical Specifications
76 www.zoll.com
WARNING. Battery charger only: To minimize risk of electric shock, when a potential equalization bus bar is
available, connect to the potential equalization port on the back of the battery charger using the ZOLL ground -
ing cable or equivalent.
Wireless Output Guidance and Manufacturer's Declara -
tion
RF Transmission Emitted (IEC 60601-1-2)
This device complies with IEC 60601-1-2 for medical electrical equipment and medical electrical systems that
include RF transmitters as specified below.
FCC Notice
ZOLL Medical Corporation has not approved any changes or modifications to this device by the user. Any
changes or modifications could void the user's authority to operate the equipment. See 47 CFR Section 15.21.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation. See 4 7 CFR Section 15.19(a)(3).
The user is cautioned to maintain 20 cm (8 inches) of space from the device to ensure compliance with FCC
requirements.
This product is certified as type of the portable device with FCC Rules. To maintain compliance with RF Expo -
sure requirement, please use within specification of this product.
The antenna used for this transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The Bluetooth module can change the output power depending on the circumstances by the application soft -
ware which is developed by module installer. Any end user cannot change the output power.
Contains Transmitter Module FCC ID: RYYEYSHCN
Note. Harmful Interference is defined by the FCC as follows: Any emission, radiation or induction that endan -
gers the functioning of a radio navigation service or of other safety services or seriously degrades, obstructs or
repeatedly interrupts a radio communications service operating in accordance with FCC rules.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation. See 4 7 CFR Section 15.19(a)(3).
This product is certified as type of the portable device with Industry Canada Rules. To maintain compliance
with RF Exposure requirement, please use within specification of this product.
IC: 4389B-EYSHCN
Standard Frequency Range Effective Radiated Power Modulation Type Data Rates
Bluetooth 2400-2483.5 MHz 10 mW FHSS; GFSK/DQPSK/8DPSK 1, 3 Mbps
Contains Transmitter module IC: 4389B