SCENARIO DONE
The Handheld will display the preprogrammed heart rhythm.
The AED PLUS Trainer will operate according to the
the chosen scenario. Instruct the student to follow the AED
PLUS Trainer voice instructions and text prompts.
+
Indicates that the scenario is done. The Trainer will
continue to cycle through analysis or CPR, depending on the
scenario. Press to return to the
SELECT MODE
prompt.
ANALYSIS - VF
SCENARIO 1 TO 4
2b
Handheld display:
Action:
The Handheld display indicates the current training settings while the
Trainer simulates the actual Zoll AED PLUS behavior.
NOTE
Refer to the Zoll AED PLUS Operator and Administration Guides for additonal
information.
NOTE
SCENARIOS
VF 1
VF 2
VF 3
VF 4
Done
Shock
CPR
Shock
CPR
1
Simulated heart rhythm:
Student Response:
ASYSTOLE 1
ASYSTOLE 2
VF 1
VF 2
Done
No Shock
CPR
Shock
CPR
2
Simulated heart rhythm:
Student Response:
VF 1
VF 2
NSR 1
NSR 2
Done
Shock
CPR
No Shock
CPR
3
Simulated heart rhythm:
Student Response:
ASYSTOLE 1
ASYSTOLE 2
ASYSTOLE 3
ASYSTOLE 4
Done
No Shock
CPR
No Shock
CPR
4
Simulated heart rhythm:
Student Response:
MANUAL
SCENARIO 1
SCENARIO 4
SELECT MODE
Press to change the mode.
Press to select the displayed mode.
SELECT MODE
2
Handheld display:
Action:
Press to change the heart rhythm.
Press to select the displayed rhythm.
ANALYSIS - VF
ANALYSIS - NSR
VF is the default simulated heart rhythm for manual mode.
The Handheld will display the selected heart rhythm and the
Trainer will behave accordingly. You can change the heart
rhythm at any time by following the instructions above.
SELECT VF
SELECT NSR
SELECT ASYS
MANUAL
2a
Handheld display:
Action:
Install six "C" batteries or attach the AC adapter to the
AED PLUS Trainer.
Turn the unit on. If the handheld is connected, the status
indicator will switch to then back to , signifying
that the self-test phase is complete and the unit is OK.
PLUG IN HANDHELD
If the handheld is not connected, the status indicator will
remain . Connect the Handheld to the Trainer. The
status indicator will turn and the software version
number will display.
SETUP
AED Trainer control:
Action:
1
Pause operation / Resume operation.
+
End current mode.
Select displayed mode.
Change mode on the text display.
CONTROLS / INDICATORS
Handheld:
Unit Failed / Unit OK.
Low battery / Normal battery.
Noisy ECG / Selected ECG.
“Attach defib pads to patient’s bare chest” prompt.
Power on / Power off.
Status indicator: is ready for use; is fault
conditon.
Zoll AED Plus Trainer:
OK
CPR "Good Compressions" prompt.
CPR "Push Harder" prompt.
CPR metronome on / CPR metronome off.
