·
·
·
·
·
·
14
·
·
·
OPERATION METHOD
Cool mode
Fan mode
Dry mode
Heating mode
When the A/C enters cooling mode automatically or cooling mode is selected after
power ON, the cooling indicator lamp lights up.
Press Up/Down key to adjust setting temperature (60 F~ 86 ) .
Press Speed key to choose High/Mid/Low speed.
When pressing mode key or choosing Fan mode by pressing the remote controller,
the wind indicator lamp lights up.
Press Speed key to choose High/Mid/Low speed.
Temperature can’t be set.
When the A/C enters heating mode automatically or heating mode is
selected after power ON, the heating indicator lamp lights up.
Press Up/Down key to adjust setting temperature
Press Speed key to choose High/Mid/Low speed.
。
F
。
(60 F~ 86 ) .
。
F
。
·
·
·
When pressing mode key or choosing dry mode by pressing the remote
controller, the dehumidification indicator lamp lights up.
Take off the water plug of the desiccant nozzle as shown on the right, insert the water
guide pipe, and put the other end of the water guide pipe into the water container
or drainage channel.
·
When entering the dry mode, the
(the compressor restart must satisfy the three-minute
delay protection function).
·
,
d
e
e
p
s
w
o
l
t
a
n
u
r
o
t
d
e
tl
u
a
f
e
d
s
i
n
a
f
e
h
t
,
e
d
o
m
y
r
d
n
I
and wind speed can’t be adjusted
Temperature can’t be set.
Use hint: when dry function is used, the exhaust pipe assemblyshould be removed,
otherwise it will cause that dehumidification effect is notobvious and "FL" full of
alarm display appears.
the room temperature is greater than 63 F Thereafter
compressor is
started
if
the compressor is controlled according to the
following rules: when the room temperature is
less than 59 F, the compressor is turned off;
when the room temperature is raised to
more than 59 F, the compressor is restarted
。
。
。
