background image

Proper Location

 

NOTE:   

Because this unit is compressor based, ample space is required around the unit to allow it to exhaust properly. 

 

NOTE: 

For refrigerator with drawbar, it is prohibited to draw it if the electricity is on.    It is not recommended to draw it 

if the floor is not smooth. Do not use it if the refrigerator is tilted. If the refrigerator is drawn to a place for use, 

please leave it upright for 10 minutes before use. 

 

Position your portable freezer in a location where there is proper air circulation and electrical connections.     

Keep the portable freezer away from heat and direct sunlight if possible.     

This portable freezer is suitable for car use and camping however, the appliance should not be exposed to rain or 

any other severe weather elements.     

This portable freezer should not be placed in a built-in or recessed area. It is designed to be freestanding.     

The normal operation of the freezer depends on heat radiation from the condenser. For the initial use, remove all 

packaging and allow at least 6” of room around the freezer (2” inches at side, 4” at rear of unit). 

 

 

_____________________________________________________________________________________________ 

 

Handling and Installation   

 

1. Remove all interior and exterior packaging.   

 

2. Position the freezer in a dry and well-ventilated place. Keep the freezer away from direct sunlight, heaters and 

corrosive gas.   

 

3. Clean the interior surface with a little bit of lukewarm water and a soft cloth.   

 

4. When inserting the AC power-cord into the power socket, make sure the power socket is a grounded 

100-240V~AC /50- 60Hz socket. Also make sure that the unit’s grounding prong has not being tampered with.   

 

Note: 

When inserting the DC power-cord, make sure the input is a 12V~DC / 24V power source.   

 

5. When moving the freezer, always use both handles to the carry the unit as level as possible. This is in order to 

protect the compressor and the sealed system 

 

 

WARNING: 

Use two or more people to move and handle this unit. Failure to do so can result in back or other 

injury. Carefully remove the packaging materials and any shipping tape before using. 

 

IMPORTANT: 

Do not remove any safety, warning, or product information labels from your portable car refrigerator. 

 

 

 

Содержание JK-B-50D










Отзывы: