ZOJE 5780BK, Руководство по эксплуатации

Страница: 19 / 60

（
7
）切布刀的安装方法
/Installing the knife
★注意：
为了防止突然启动造成人身事故，请关掉电源，确认马达停止转动后再进行。
★
WARNING
：
To protect against possible personal injury due to abrupt start of the
machine, be sure to start the following work after turning the power of and
ascertaining that the motor is at rest.
When replacing the knife with a new one, perform as follows.
1) Knife can be easily removed together with the washer when removing
knife retaining screw .
2) Adjust so that the knife, when lowered the knife bar by hand, is spaced
to 2 mm away from the top surface of the throat plate as illustrated
in the sketch. Then, be sure to place the washerand tighten the knife retaining screw.
inch
→
mm
换算表
/
Inch
→
mm CONVERSION TABLE mm CONVERSION TABLE
切布刀尺寸
/inch
Knife size /inch
mm
表示
Indication of mm
切布刀尺寸
/inch
Knife size /inch
mm
表示
Indication of mm
1/4 6.40 13/16 20.60
3/8 9.50 7/8 22.20
7/16 11.10 1 25.40
1/2 12.70 1 1/8 28.60
9/16 14.30 1 1/4 31.80
5/8 15.90 1 3/8 34.90
11/16 17.50 1 1/2 38.10
3/4 19.10
请按如下的步骤更换新的切布刀。
1
）卸下切布刀固定螺钉 之后，把
切布刀 和垫片一起简单地卸下
来。
2
）用手按下切布刀之后，把切布
刀和针板上面的距离调整到 0 ～
1mm, 然后套上垫片，并拧紧固定。
18