zogics NSP-HEPA-PRO, Руководство пользователя

Страница: 18 / 20

16
Troubleshooting
Unit won’t switch on
(Power lamp is not lighted)
Unit can’t switch on
(Power lamp twinkles),
button doesn’t respond
There’s pollution in the air
but the indication lamp still
hasn’t turned ‘blue’.
Even running constantly, the
air pollution indication lamp
is at ‘red’
‘Pop’ and ‘bang’ sounds occur
while running.
The outlet is omitting a
strange smell.
The purifier does not enter
sleep mode automatically at
night.
Is the power plug inserted correctly?
• Insert the power plug.
Is the left and right air inlet panel uncovered?
• Cover left and right air inlet panel of purifier.
Is the roof air outlet grid network installed straight?
• Install the roof air outlet grid in place
Is the purifier put in a place where it’s easy to bring in the
polluted air?
• Change the position of purifier.
Is the particle sensor dirty?
• Clean the particle sensor.
Is there too much dust in the anion generator ?
• Clean the anion generator.
Is the filter screen dirty?
• Clean the filter screen
Has the filter screen not been replaced for a long time?
• Replace the filter screen regularly.
Is the purifier running under manual mode?
• Press the ‘Automatic’ button on the operation panel to ensure the
purifier running under automatic mode.
Problem Solution