ZOETAC ZT-1018UC Скачать руководство пользователя страница 11

 

E-10 

3. Press and hold the PAIRING button for 3 seconds or more. PAIRING indicator blinks quickly. The unit is 

now in pairing mode and is ready to be paired with other Bluetooth source devices. 

4. Perform pairing procedure on the source device to detect this unit. “PRCD600B” will appear in the 
detected devices list (if available) in the source device. (Refer the source device operating manual for 
details). 
5. Select  “PRCD600B” from the source list. If Passcode is required, enter “0000”. Passcode may be called 
PIN Code, Passkey, PIN number or Password. 
6. Pairing indicator  will stop blinking once the unit is successfully paired with the source device.(Pairing 
information is now memorized in the unit.) Some audio source devices may connect with the unit 
automatically after pairing is completed, otherwise follow the instructions in the source device operating 
manual to start connection. 
7. Press the play button on main unit source device to start Bluetooth connection. 

 
NOTE: 

• Place the devices to be paired within 1 meter (3 feet) of each other when pairing. 
• Some source devices are unable to display lists of detected devices. To pair this unit with the source 
device, refer to the source device operating manual for details. 
 

Notes when using unit with a mobile phone: 

• This unit cannot be used to talk over the telephone even when there is a Bluetooth connection made to a 
mobile phone. 
• Please refer to the operating manual supplied with the mobile phone for details on operation of your mobile 
phone while transmitting the sound using a Bluetooth connection. 

 
Pairing Bluetooth devices: 

Bluetooth devices need to be initially paired first before they can exchange data. Once paired, it is not 
necessary to pair them again unless: 

• Pairing is made with more than 8 devices. Pairing can only be made one device at a time. This unit can be 

paired to a maximum of 8 devices. If subsequent device is paired, the oldest device paired, will be deleted 
and replaced with the new one. 

• This unit is reset. All pairing information is deleted when unit is reset. 
• Pairing information is deleted while re-pairing, etc. 

 
 

SPECIFICATIONS 

Frequency Range:

 AM  530 - 1620 kHz 

 

FM  88 - 108 MHz  

Power Sources:

  120V~ 60Hz 12W or 6 x DC1.5V ‘C’ (UM-2) Batteries (Not included) 

 
 

 

Содержание ZT-1018UC












Отзывы: