This guide is believed to be correct at the time of publication and BICOM takes no responsibility for
consequences from printing error or inaccuracies. Specifications are subject to change without notice.
Front
Power mode status LED (left hole)
IR Receiver (right hole)
Back
IEC Power Inlet
Channel Selector
Zone Selector
Button
10/100 BaseT Ethernet Port
IR Input
Speaker binding posts
Power switch
See the Detailed Overview section for more information about these features.
Step 1 – Connect
In this section we will walk through the steps to configure a zoet dS2 AMP1 into the Main Room in the
left position.
1.
In the box you should find the dS2 AMP1 along with an AC cable, plug in one end of the cable into
the dS2 AMP1 and the other into your power outlet. Make sure the On/Off switch on the back
panel is still in the off position before plugging power into the power outlet.
