Zoeller 62 HD Series Скачать руководство пользователя

Страница: 1 / 8

SECTION: Z2.20.180

ZM2353

0515

Supersedes

0908

NOTICE TO INSTALLER: Instructions must remain with installation.

Congratulations on the purchase of the Zoeller 62 HD Series

submersible pump. For over seventy years the name Zoeller has

represented the standard for submersible dewatering and sewage

pumps. The same high quality workmanship and easy maintenance

design has been incorporated into this line of heavy-duty solids-handling

submersible sewage pumps. This Zoeller pump will provide years of

trouble-free service when installed according to the manufacturers’

recommendations.

Model Number: _______________ Date Code: _______________
Serial Number: Pump 1_____________ Pump 2_____________



Simplex



Panel P/N ______________________________



Duplex



Rail System P/N ________________________

Job Name: _____________________________________________
Distributor: ____________________________________________
Sales Order Number: ____________________________________
Contractor: ____________________________________________
Date of Installation: ____________________________________
System Readings During Operation: Voltage _____ Amps ______

OWNER’S MANUAL

62 HD SERIES SUBMERSIBLE NON-CLOG UNITS

This manual incorporates the installation, operation, mainte-

nance, and service instructions into one document to aid in the own-

ership of a Zoeller submersible non-clog wastewater product. Please

read and review this manual before installing the product. Follow the

steps and procedures listed on ZM1074 for a proper start-up. Many

items contained within, when followed correctly, will not only ensure

a long and problem-free life for the pump, but also save time and

money during installation. Reference ZM2354 for repair manual on

62 HD Series Pumps. Should further assistance be necessary please

call our Technical Support Department at 1-800-928-PUMP (7867).

Table of Contents

Safety Instructions .......................................................................1
Limited Warranty ..........................................................................2
Preinstallation Information ..........................................................3
Electrical Data ...............................................................................3
Typical Dewatering Installation ...................................................4
Typical Sewage Installation ........................................................4
Pump Wiring Instructions .........................................................5-6
Operation .......................................................................................7
Maintenance ..................................................................................7
Service Checklist ..........................................................................8

Safety Instructions

TO AVOID SERIOUS OR FATAL PERSONAL INJURY OR MAJOR

PROPERTY DAMAGE, READ AND FOLLOW ALL SAFETY

INSTRUCTIONS IN THIS MANUAL AND ON THE PUMP.

THIS MANUAL IS INTENDED TO ASSIST IN THE INSTALLATION

AND OPERATION OF THIS UNIT AND MUST BE KEPT WITH

THE PUMP.

This is a SAFETY ALERT SYMBOL.

When you see this symbol on the pump or in the

manual, look for one of the following signal words

and be alert to the potential for personal injury or

property damage.

Warns of hazards that WILL cause serious personal

injury, death or major property damage.

Warns of hazards that CAN cause serious personal

injury, death or major property damage.

Warns of hazards that CAN cause personal injury

or property damage.

INDICATES SPECIAL INSTRUCTIONS WHICH ARE

VERY IMPORTANT AND MUST BE FOLLOWED.

THOROUGHLY REVIEW ALL INSTRUCTIONS AND WARNINGS

PRIOR TO PERFORMING ANY WORK ON THIS PUMP.

MAINTAIN ALL SAFETY DECALS.

CAUTION

Owner’s Information

REFER TO WARRANTY ON PAGE 2.

MAIL TO:

P.O. BOX 16347 • Louisville, KY 40256-0347

SHIP TO:

3649 Cane Run Road • Louisville, KY 40211-1961

(502) 778-2731 • 1 (800) 928-PUMP •

FAX

(502) 774-3624

Visit our web site:

zoellerengineered.com

Product information presented

here reflects conditions at time

of publication. Consult factory

regarding discrepancies or

inconsistencies.

Register your

Zoeller Engineered Product

on our website:

http://reg.zoellerengprod.com/

Содержание 62 HD Series









Результаты поиска

Содержание 62 HD Series

Отзывы:

Похожие инструкции для 62 HD Series

Бренды по названию

Популярные бренды

Zoeller 62 HD Series, Руководство пользователя

Результаты поиска

Содержание 62 HD Series

Отзывы:

Похожие инструкции для 62 HD Series

Бренды по названию

Популярные бренды