Zodikam Z-WE826, Руководство пользователя

Страница: 7 / 21

Before steps finishing, don’t cut the power off, or it will break your router.
2.3 System Requirements.
Network card and Ethernet cable
TCP/TP net software (Windows 95 or higher version has pre-install)
IE 5.0 or higher version
2.4 Install Condition
When you install the router, please refer the below
Put the device horizontally
Keep away from any heat device
Do not put it in some place which is too dirty or too humidity.
Remark :
The environment will effect the transfer distance , recommend using environment:
Temperature:
0 ~40 , Humidity : 10%~95% RH
3. TCP/IP Configuration
Before using the device, you need to configure the network correctly, this manual is based
on the Windows 2000/XP, the IP of the device is 192.168.1.1 , subnet mask is 255.255.255.0 .
Firstly, connect your PC to the LAN port, and then you can configure the IP of your PC in 2
ways.
Set the IP
Set your PC’s IP as 192.168.1.xxx(xxx could be any number in 2~254), subnet mask
to be 255.255.255.0 , default gateway 192.168.1.1 , DNS server 192.168.1.1
Auto set the IP by the DHCP server.
Set the TCP/IP to “automatically get IP address”, after setting , you could use the
Ping command to check if the device has connected to the PC. For an example, in
Windows 2000, run the cmd.exe , and the enter ping 192.168.1.1 If the screen shows as
the below, means OK, the device connected to the PC.
If it shows as below, it means fail