3
EN
Run the cable around the duct and position
the plastic duct so that it protects the blowing
duct.
Reposition the cover and attach it to the
frame on the heat pump using the 4 long
screws and washers provided.
Position the duct on the frame and secure it using the 4 self-boring screws
provided (there are holes in the duct framework).
Run the metal cable into the tensioner (following the arrow) then into the plastic duct.
Run the end of the cable into the other hole in the tensioner and adjust
its height.
Attach the cable to the ceiling using the loop at the other end of the cable.
Power up the heat pump.
