4.5 Starting the Cleaner
The default cleaning surface setting for the Vortex
cleaners is Floor Only
. To change the current
programmed cycle, see
Section 5. Programming the
Cleaner
.
Select Cleaning Surface (all models):
Use
to change cleaning surface setting.
Toggle between:
Floor Only
Floor and Walls
Waterline (VX55 4WD only)
Select Cleaning Intensity Level
(VX55 4WD only):
Use
to choose cleaning intensity level.
Toggle between:
INTENSIVE
HIGH INTENSITY
Select Pool Shape (VX55 4WD only):
Use
to choose pool shape.
Toggle between:
RECTANGULAR
FREEFORM
Begin Cleaning:
After selecting the cleaning surface and other options as
applicable, press
to begin operation.
The screen displays the time remaining for the selected
cycle. For example, 0:44 on the display indicates that
cleaning will be completed in 44 minutes.
NOTE:
The control box automatically switches to standby
power mode after 10 minutes of inactivity and the
display screen turns off. Press any key to exit standby
mode. Cleaner will continue to function in standby
mode if in the middle of a cleaning cycle.
Display Current
Time/ Set Time
Program Cleaning
Cycles / Set Time
Navigate Day/Hour
Remove Cleaner
from Pool
Start/Stop Cleaner
Operation
Cancel Programming
Validate Time Setting
Selection
Select Cleaning Surface
• Floor
• Floor and Walls
• Waterline only
Select Cleaning Level
• Intensive
• High Intensity
Select Pool Shape
• Rectangular
• Freeform
Dirty Filter
Indicator
4.4 The VX55 4WD Cleaner Control box
Figure 20. VX55 4WD Control Box
11
H0516700_REV A
