background image

12

H0491600.C - EN- 2015-12

 3.7.2 Programming cleaning cycles

Program 

up to 7 cleaning cycles

 (for example, 2 days per week: Wednesdays and Saturdays over 4 weeks).

•  You must set the ti me before you program the cleaning cycles, see §  “3.7.1 Setti  ng the ti me”.

•  Start by selecti ng the cleaning cycle on the control box, see § «“3.5.1 Cleaning cycle selecti on (depending on model)”.

•  Then program the days, hours and minutes.

DAY

Press 

 for 3 seconds 

The days of the week fl ash twice.

The  

 LED and the current 

date and ti me fl ash to remind 

you.

Press 

 to start programming

Select the day with

 

 or 

Press 

 to confi rm,

HOURS

The hours start to fl ash

Select the hour with 

 or 

Press 

 to confi rm,

MINUTES

The minutes start to fl ash

Select the minutes with

 

 or 

 

(every 1/4 hour)

Press 

 to confi rm,

Exit the menu by pressing

 

 or 

To cancel a day's programming, 

hold down 

 unti l the display 

changes.

•  The programming stops automati cally at the end of the 7th cleaning cycle and the LED 

 switches off . 

•  To cancel ALL the programming, exit the menu 

 and hold down 

 unti l the display changes.

Tip: check the programming

Press 

. Each programming is displayed for 3 seconds.

EN

Содержание OV 3300





















Отзывы: