3
Start-Up
Before using a new Nature
2
Spa, clean debris and algae out
of the spa and spa equipment.
Important: Do not install the new Nature
2
Spa until the
__
spa water is clean and chemically balanced.
___________
Balance spa water before installing Nature
2
Spa.
•
6
.
7
-
2
.
7
H
p
• Calcium Hardness
200-400 ppm
• Total Alkalinity
80-120 ppm
• Total Dissolved Solids (TDS) 300-2000 ppm
Consult your Nature
2
dealer for water balance instructions.
Balance the Water
To find out if your spa water is balanced:
• take a water sample to your dealer to be tested, or
• ask your dealer to recommend a spa test kit for
water balance.
Element: pH
Range: 7.2-7.6
If too low:
The surface of your spa can become etched.
Metal parts in the pump and plumbing will corrode.
How to fix:
Add pH increaser.
If too high: “Scale” forms on the surface of your spa. The water
can become cloudy. Equipment can be damaged.
How to fix:
Add pH decreaser.
Element: Calcium Hardness
Range: 200-400 ppm
If too high: Rough, discolored deposits (“scale”) will form on the
spa surface and inside spa equipment.
How to fix:
Drain or dilute the spa water. Consult your dealer.
How to fix:
Add calcium chloride and hardness increase.
Element: Total Alkalinity
Range: 80-120 ppm
If too low:
It pro
If too low:
Metal parts in the pump and plumbing will corode.
vides no buffer so that you constantly get
fluctuating pH readings, which can damage
equipment and spa surfaces.
How to fix:
Use an alkalinity increaser.
If too high: The water becomes cloudy or milky white.
How to fix: Add acid to bring alkalinity down.
