![background image](http://html1.mh-extra.com/html/zodiac/milpro-srmn-500/milpro-srmn-500_owners-manual_4049716010.webp)
9 / 26
ENGINE SELECTION AND SETTINGS
4.2. Engine tilt angle
In general, the engine must be tilted so that the propeller centreline is parallel to the water surface.
A different tilt angle setting may, however, be recommended in some situations (refer to the
RECOMMENDED OPERATING PROCEDURE chapter).
The engine tilt can be adjusted either manually or using the Trim for engines that are so provided.
Engine too far from the transom The boat is trimmed bows up.
Engine too close to the transom The boat is bow heavy.
WARNING
ADJUST THE TILT ANGLE WITH THE ENGINE STOPPED.
NOTE:
For information relating to the engine in particular, refer to the manufacturer's
instructions.