background image

 

1

 
 

Dear Sirs, 
 
 
 
Thank you for the confidence you have shown in BARACUDA technology for automatic 

pool cleaning. It is thanks to pool professionals that we have become the European and 

world leader in the field of hydraulic appliances.  This is why we wish  to  be  in  even 

closer contact with you, the better to respond to your needs and offer you a constantly 

improving technical and sales service.  
 
 
The Indigobook is the technical guide distributed only to pool industry professionals 

selling INDIGO

TM

 robots by ZODIAC. It supplements the information given to the user 

in the technical instructions provided with the appliance. 
This information will enable you to give valuable advice to your INDIGO

TM

 owning 

customers. It will also help you adjust the robot effectively to suit the configuration of 

every pool for optimum performance. 
 
The design of ZODIAC appliances has always been oriented to simplicity and reliability. 
 
Please do not hesitate to contact our technical service or to get in touch with our usual 

sales contact for further information. 
 
 
 
 
 
 

The ZODIAC POOL CARE EUROPE technical and sales team 

The ZODIAC product INDIGO™ is made by ZODIAC POOL CARE EUROPE S.A.S.U. 

 

 

 

Содержание INDIGO































Отзывы: